How to Replace a Broken Ceiling Light with an Innr Round Ceiling Light: A Step-by-Step Guide

Quick answer

To replace a broken ceiling light with an Innr Round Ceiling Light, first turn off the power at the breaker, remove the old fixture, and disconnect the wiring. Then mount the new fixture, connect the wires, and pair it with your Zigbee bridge using the app. The process takes about 30–60 minutes and requires basic electrical safety.

A broken ceiling light can leave a room dim and frustrating, but replacing it with a smart fixture is a straightforward DIY project. The Innr Round Ceiling Light not only restores brightness but also adds tunable white or colour control through your existing Zigbee setup. This guide walks you through each step, from removing the old fixture to pairing the new light with your bridge.

Before you start, confirm that your home’s wiring is compatible and that you have the right tools. You’ll need a voltage tester, screwdriver, wire nuts, and a ladder. Always turn off the power at the circuit breaker before touching any wires, and if you’re unsure about any step, consult a licensed electrician.

What You Need Before You Start

Gather the necessary tools and materials: a screwdriver (flathead and Phillips), wire strippers, wire nuts, a voltage tester, and a ladder. You’ll also need your Innr Round Ceiling Light and a compatible Zigbee bridge or hub. If you already use Philips Hue or another Zigbee controller, the Innr light will pair with it.

Check the existing ceiling box to ensure it can support the weight of the new fixture. The Innr Round Ceiling Light is designed for standard ceiling boxes, but verify that the mounting holes align with your box’s spacing. If the box is old or loose, reinforce it before installation.

• Turn off the power at the breaker and use a voltage tester to confirm the wires are dead.
• Have a helper hold the fixture while you connect wires—this prevents strain on the connections.

Removing the Old Ceiling Light

Start by removing the shade or globe and the mounting screws that hold the fixture to the ceiling. Carefully lower the fixture to expose the wiring. Note the wire colors: typically black (live), white (neutral), and green or copper (ground). Take a photo for reference.

Disconnect the wires by unscrewing the wire nuts and separating the connections. If the old fixture is heavy or awkward, support it with one hand while you work. Once disconnected, remove the mounting bracket if it’s not compatible with the new fixture.

• Never touch bare wires until you’ve confirmed the power is off.
• If the old fixture has a metal box, check for a ground wire—it’s essential for safety.

Wiring and Mounting the Innr Round Ceiling Light

Attach the new mounting bracket to the ceiling box using the provided screws. Pull the house wires through the bracket’s opening. Connect the wires: black to black (live), white to white (neutral), and ground to the green or bare copper wire. Use wire nuts and tug gently to ensure they’re secure.

Lift the Innr Round Ceiling Light to the bracket and secure it with the screws. Be careful not to pinch wires. The fixture is extra thin, so it sits close to the ceiling—double-check that no wires are trapped between the fixture and the bracket.

• Match the wire colors exactly; if your home’s wiring doesn’t follow standard colors, stop and consult an electrician.
• Use a voltage tester again after wiring to confirm no current is present before turning the power back on.

Powering On and Pairing with Zigbee

Restore power at the breaker and turn on the switch. The light should turn on—if not, switch the breaker off and recheck your connections. Once the light is on, it’s time to pair it with your Zigbee bridge. Open your Hue or Innr app and select 'Add light' or 'Search for devices'.

Put the light into pairing mode by turning the wall switch off and on a few times, or follow the app’s instructions. The Innr Round Ceiling Light connects directly to Zigbee, so it should appear within seconds. Name the light and assign it to a room.

After pairing, test dimming and colour changes. If you have the White & Colour version, you can switch between 16 million colours. If you have the tunable white version, adjust from warm to cool white (2000K–6500K) to suit your activities.

• If the light doesn’t pair, move your bridge closer or check for Zigbee interference from other devices.
• Use the app to create scenes and routines—this is where the smart features really shine.

Step-by-Step Replacement Checklist

1. Turn off power and test: Switch off the circuit breaker and use a voltage tester on the wires to confirm they are dead. This is non-negotiable for safety. Checkpoint: If the tester lights up, do not proceed—call an electrician.
2. Remove the old fixture: Unscrew the shade and mounting screws, then disconnect the wires. Take a photo of the wiring before you disconnect. Checkpoint: Make sure you have a clear reference for wire colors.
3. Install the new mounting bracket: Secure the bracket to the ceiling box with the provided screws. Ensure it is tight and level. Checkpoint: A loose bracket will cause the fixture to sag.
4. Connect the wires: Match black to black, white to white, and ground to ground. Use wire nuts and pull to test the connections. Checkpoint: If wires are reversed, the light may not work or could be a hazard.
5. Mount the Innr Round Ceiling Light: Lift the fixture to the bracket and secure with the screws. Be careful not to pinch wires. Checkpoint: The fixture should sit flush against the ceiling.
6. Restore power and pair: Turn the breaker back on and switch on the light. Open your Zigbee app and search for the new device. Checkpoint: If pairing fails, cycle the power and try again.

Innr Round Ceiling Light Options

• Innr Round Ceiling Light 42cm (Warm to Cool White): The extra thin Round Ceiling Light with customizable white tones in 42cm. Dimmable from warm white to cool white light (2000K - 6500K) with a powerful light output of 3100 lumens. This version is ideal for rooms where you want to adjust the light temperature for different tasks, like bright cool light for reading or warm light for relaxing.
• Innr Round Ceiling Light 42cm (White & Colour): The extra thin Round Ceiling Light with customizable white tones, or choose between 16 million colours in 42cm. Offers first-class light quality with 16 million colours or adjustable white. If you want to add accent colours to a room or create a party atmosphere, this version gives you the flexibility to switch between white and colour scenes.

Replacing a broken ceiling light with an Innr Round Ceiling Light is a manageable project that upgrades your room with smart control. By following these steps and double-checking your work, you’ll enjoy reliable, tunable lighting for years. If you’re not comfortable with electrical work, don’t hesitate to hire a professional—safety comes first.